View MSR211P_4388836.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Safety Relays
Modular Monitoring Safety Relays
Minotaur MSR211P
Category Power Supply Power Consumption Safety Inputs Input Simultaneity Max. Input Resistance Inputs Reset Reset Outputs Cat. 4 per EN954-1 (ISO13849-1) 24V DC; 0.8 to 1.1 x rated voltage 8W 1 N.C., 2 N.C., light curtain Infinite 1300ohms 3200ohms Monitored Man. or Auto./Man. 2 N.O. safety; 1 N.C. auxiliary 1 SS PNP Inputs Closed 1 SS PNP Outputs Active AC-1: 6A/250V AC DC-1: 6A/24V DC B300, AC-15; 3A/250V AC, 3A/125VAC P300, DC-13; 2.5A/24V DC 1x6A, 2x4A 20mA @ 30V DC 6A slow blow or 10A quick blow 10mA/10V DC AgSnO2 with 2 micron gold plating Gold plated 3s 25ms 30ms+2.4ms per MSR221 40-145 ms, depending on expansion modules used Green = Input 1 closed Red = Input 1 open Green = Input 2 closed Red = Input 2 open Green = CH1 output active Green = CH2 output active Green = Power Green = Run (outputs active) Red = Stop (outputs off) + diagnostics Amber = Ready (inputs closed) 2500V 2 -5C to +55C (+23F to 131F) 90% RH IP40 (NEMA 1) IP20 Input; SS outputs 0.2-4mm2 (24-12 AWG) 0.4-0.5 Nm (3.54-4.43lb*in) Polyamide PA 6.6 35mm DIN rail 280g (0.62lbs) 100,000 operations 500,000 operations 1,000,000 operations 2,000,000 operations 2,000,000 cycles 10-55 Hz, 0.35mm 10g, 16ms, 100 shocks
Output Utilization per IEC 60947-4-1 (Resistive)
Description
The MSR211P forms one of the base units for the modular Minotaur MSR200 family of monitoring safety relays. It can be combined with other modules of the MSR200 Series to configure a safety control system with numbers of inputs and outputs matching users' specific application requirements, as well as diagnostic and networking capabilities. Up to 10 input modules and 2 output modules can be connected to one base unit by simply removing the terminator, included with each base unit, and connecting the ribbon cables of the neighboring module. The terminators must be inserted into the final input and output modules. The MSR211P has two inputs. Each input can be wired in one of three ways: 1N.C., 2 N.C., or 2 PNP connections from a light curtain. The MSR211P does not perform cross fault monitoring, and would not detect a short across the inputs of a 2 N.C. input. When connected to light curtains, the light curtain must perform the cross fault detection. The MSR211P has the capability to perform external device monitoring (EDM). The EDM capability works in conjunction with the reset option. The user selects EDM and the reset function by jumpers across terminals Y40, Y41 and Y42. The MSR211P has two semiconductor outputs designed to send status information to a PLC. Terminal Y33 indicates the inputs are closed (the Ready LED is on). Terminal Y32 indicates the outputs are active. The outputs include 2 normally open safety rated outputs and 1 normally closed auxiliary output. The safety outputs have independent and redundant internal contacts to help ensure the safety function.
Output Utilization per IEC 60947-5-1 (Inductive) Thermal Current (non switching) Output, Solid State Fuses Output (external) Min. Switched Current/Voltage Contact Material Ribbon Cable Contacts Power On Delay Response Time MSR211 MSR211+ MSR221 Recovery Time Indication LEDs
Impulse Withstand Voltage Pollution Degree Operating Temperature Humidity Enclosure Protection Terminal Protection Short Circuit Protection Conductor Size Torque Settings--term. screws Case Material Mounting Weight Electrical Life 222V AC/4A/880VA cos=0.35 220V AC/1.7A/375VA cos=0.6 30V DC/2A/60W 10V DC/0.01A/0.1W Mechanical Life Vibration Shock
Features
* * * * * * * * Category 4 per EN 954-1 Stop category 0 2 Input circuits: light curtain, gate, or E-Stop inputs 2 Safety outputs, 1 auxiliary output 2 Solid state outputs 10 Diagnostic LEDs Monitored or automatic reset Removable terminals
Specifications
Standards EN 954-1, ISO 13849-1, IEC/EN 60204-1, IEC 60947-4-1, IEC 60947-5-1, ANSI B11.19, AS4024.1 C-Tick, CE marked for all applicable directives, cULus & TUV
Approvals
See Output Ratings on page 1-29 for details. Consult factory for ratings not shown.
4-74
Safety Relays
Modular Monitoring Safety Relays
Minotaur MSR211P Product Selection
Inputs Two Inputs 1 N.C. or 2 N.C. or Light Curtain Safety Outputs 2 N.O. Auxiliary Outputs 1 N.C. Solid State Outputs 2 Power Supply 24V DC Catalogue Number 440R-H23177
Dimensions--mm (inches) Block Diagram
99 (3.89) 45 (1.77)
S12 S11 S20 S21 S32 S31 S51 S41
13
Y40
23 31
13 23 Y41 Y42
33 A1
K1
114.5 (4.5)
Y1 S42 Y2 S50
K2
14 24 32 Y31 Y32 Y33
S34 S62
Y31 Y32 Y33 Y30 14 24
A2 32
Typical Wiring Diagrams
+24V DC
Termination or Expansion Cable Termination or Expansion Cable Termination or Expansion Cable Light Curtain Out 1 Out 2
+24V DC
Termination or Expansion Cable Light Curtain Out 1 Out 2
A1 S12
S32
Y31 Y40 Y41 Y42 13 23 31
L1 L2 L3
A1 S12
S32
Y31 Y40 Y41 Y42 13 23 31
L1 L2 L3
MSR211P
Safety Gate
K1 K2
Safety Gate
K1
MSR211P
K2 A2 S42 S62 Y30 Y32 Y33 S34 Y1 Y2 14 24 32 K1 K2
Reset Ground Output Active Inputs Closed
A2 S42 S62
Y30 Y32 Y33 S34 Y1 Y2 14 24 32 K1 K2
M
M
Closed Ground Output Active Inputs Closed
Reset
Closed
Light Curtain and Dual Channel Safety Gate, Monitored Manual Reset, Monitored Output
+24V DC
Termination or Expansion Cable Termination or Expansion Cable Light Curtain Out 1 Out 2
Light Curtain and Single Channel Safety Gate, Monitored Manual Reset, No Monitoring Output
A1 S12
S32
Y31 Y40 Y41 Y42 13 23 31
L1 L2 L3
MSR211P
Safety Gate
K1 K2
A2 S42 S62
Y30 Y32 Y33 S34 Y1 Y2 14 24 32 K1 K2
M
Closed Ground Output Active Inputs Closed
Light Curtain and Dual Channel Safety Gate, Automatic Reset, Monitored Output
Diagnostics - Red Stop LED blinks Blink Rate 2 3 Continuous Description Change in Y40/Y41/Y42 circuit during operation. Fault in external feedback circuit Y1-Y2. Clear fault and cycle power to reset the module. Internal fault in base or expansion module
4-75

▲Up To Search▲

Price & Availability of MSR211P

	To Download MSR211P Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .